If you’re like most people, you probably use Linux to store and share files. But what if you want to do more than just copy files? What if you want to create a shared directory between two systems? That’s where the rsync command comes in. rsync is a command that allows you to copy files between two systems, without having to worry about the permissions or file format. It’s perfect for sharing directories between two systems, or for copying files that are large or have special permissions. Here are 10 examples of how the rsync command can be used:

  1. To copy a file from one system to another: $ rsync -avzf /tmp/file1 /tmp/file2 2) To copy a directory from one system to another: $ rsync -avzd /usr/share/documents /usr/share/documents 2) To copy a file with special permissions: $ sudo rsync -avxP –exclude=/etc/* –exclude=/usr/* –exclude=/var/* –exclude=* 3) To copy a large file over the network: $ wget http://www.example.com/file | rsync -avzf –progress-output=always –delete-after=5 * 4) Tocopy a directory with subdirectories: $ cd .. && rm -rf * 5) Tocopy multiple files at once: $ cp -rf .txt .jpg 6)Tocopy directories and their subdirectories: $ cd .. && mkdir subdirs && cd subdirs 7)Tocopy individual files in each directory: $ cp .txt .jpg 8)Tocopy all files in adirectory (including its subdirectories): $ cp .// 9)Tocopy all files in everydirectory (including its subdirectories): $ cp ./ 10)Tocopy only the

The rsync Tool

The rsync tool copies files and directories between two computers. It uses a sophisticated algorithm that scans directory trees to find files on the source computer that don’t exist on the destination computer. These files are transmitted to the destination computer. What makes rync so clever is it can figure out which pieces of existing files have been modified, and it only sends the changed portions.

You can use rsync to copy files to a different location on your hard drive, to a different hard drive in the same computer, to an externally connected USB drive, or any other network-accessible location.

On top of that, rsync can optionally preserve symbolic links, hard links, and file metadata such as file ownership, permissions, and access times. To support all this functionality, rsync has many options and figuring them all out takes time. We’ve collected these 10 examples to help you get started. We’ve already written about doing backups with rsync , so we’re concentrating on other uses here.

For all of its many options, the structure of an rsync command is simple. We need to provide the source, the destination, and the options we want to use. You’ll probably find that rsync is already installed on your Linux computer—it was, on all of our test machines—but if it isn’t it’ll definitely be in your distribution’s repositories.

1. Copy Files to a Different Directory

Here’s a simple example to get us going. We’re going to copy the files from the “project-files” directory to the “Documents” directory. We’re using two options, the -a (archive) option and the -v (verbose) option. The verbose option tells rsync to explain what its doing as it does it. The archive option preserves file ownership and some other items we’ll look at shortly.

The format of the command is options source-location destination-location.

Using ls on “Documents” folder shows the files have been copied.

While rsync is working, the files are listed as they’re copied. We’re told:

The number of bytes that are sent. The number of bytes received. Before the file transfer takes place, rsync has to work out which files need to be transferred. To do that, some information about the files on the destination must be retrieved by rsync . This information is contained in the received bytes. The speed of the transfer. The total size of the copied files. The “speedup. ” This is the ratio of the total size divided by the sum of the sent and received bytes. The higher this number, the more efficient the transfer.

We modified the text file in the source directory and repeated the rsync command.

This time the only file that needs to be updated is the text file we modified. The speedup figure is now 30,850. This is how much more efficient it is to copy the modified portion of that single file, than to copy all of the files.

The -a (archive) option actually represents a collection of other options. It’s the same as using all of these options:

r: Recursively work through directory trees in the source directory and copy them to the destination directory, creating them if they do not already exist there. l: Copy symlinks as symlinks. p: Preserve file permissions. t: Preserve file modification times. g: Preserve group permissions. o: Preserve the file ownership. D: Copy special files and device files. Special files can be communication-centric items that are treated like files, such as sockets and first-in, first-out pipes (fifos). Device files are special files that provide access to devices and pseudo-devices.

This is such a frequently used combination that rsync provides the -a (archive) option as a shorthand way to invoke them all.

2. Copy a Directory to a Different Directory

If you look at the previous rsync command you’ll see a trailing forward slash “/” on the file path of the source directory. This is significant. It tells rsync to copy the contents of the directory. If you don’t provide the trailing forward slash, rsync will copy the directory and its contents.

This time the directory name is added to the file name as they are listed. If we look inside the destination directory we’ll see the source folder has been copied across with the files inside it.

3. Copy a Directory to a Different Drive

Copying files to another location on the same hard drive doesn’t give you protection against a drive failure. If that drive gives up the ghost, you’ve lost the source and destination copies of those files. Copying them to another hard drive is a much more robust way to protect your data. All we need to do is provide the correct path to the destination drive.

Looking at the other hard drive shows us the directory and files were copied over to it.

RELATED: What to Do When Your Hard Drive Fails

4. Doing a Dry Run First

Before we look at how rsync can usefully delete files for us, let’s look at how we can make rsync perform a dry run.

In a dry run, rsync goes through the motions of performing the actions we’ve asked for, but doesn’t actually do them. It reports on what would have happened if the command had been executed. This way, we can make sure that the command does exactly what we expect.

To force a dry run we use the –dry-run option.

The files that would have been copied are listed for us, and we get the usual statistics, followed by the message (DRY RUN) so that we know nothing actually took place.

5. Deleting Files in the Destination Directory

The –delete option tells rsync to delete files and directories in the destination directory that are not in the source directory. This means the destination directory will be an exact copy of the source directory. We’ll be prudent and use the –dry-run option first.

We’re informed that two files will be deleted. If we’re sure we don’t care that they’ll be deleted, we can remove the –dry-run option and carry out the command for real.

This time the contents of the directories are synchronized and the two extra files are deleted.

6. Deleting The Source Files

You can choose to delete the source files after a successful transfer, making rsync operate more like a move than a copy. If the transfer wasn’t successful, the source files are not deleted. The option we need to use is –remove-source-files .

Note that the files can be deleted even if no files are transferred. That’s because if rsync checks, and all the files are already in the destination directory and there’s nothing for rsync to do, rsync considers that a successful transfer.

Also, rsync only deletes the files from the source directory. It doesn’t delete the source directory nor any sub-directories, just the files in them. We can see this by using the -R (recursive) option with ls, on the source directory.

7. Copy Files to a Remote Computer

To synchronize folders with a remote computer, rsync must be installed on both computers. Set up SSH communication between the two computers before you try to use rsync to the remote computer.

You need to be able to log in remotely as a regular user on the remote computer for rsync to work. It doesn’t matter whether you use an ID and password to log in, or if you’ve set up SSH keys for secure password-less access, but if you can’t log in as a user, then rsync won’t work either.

If you log in with a password, rsync will prompt you for the password. If you use SSH keys to log, in the process is seamless.

The only extra thing you need to do is to add the user account name and the IP address of the remote computer to the start of the destination file path. Use an at sign “@” to separate the user name from the computer name or IP address, and a colon “:” to separate the computer name or IP address from the directory path.

On our test network, these two commands are equivalent.

We get the same information reported to us as we do when we’re copying files locally.

8. Include or Exclude Files or Directories

You may have files and directories in the source directory that you don’t want to copy to the destination computer. You can exclude them using the –exclude option. In a similar way, you can choose to include specific files and directories with the –include option.

The quirk is that if you use the –include option on its own, all files are copied, as normal—including your specifically included files. To only copy your included files you have to –exclude everything else.

You can use as many –include and –exclude options in your command as you like, but make sure you put your –include options before your –exclude options. Also, make sure you have a trailing forward slash on your source file path.

This command copies only C source code files and CSV data files to the destination computer.

The only files copied are the ones we specifically included.

9. Compress Files in Transfer

The -z (compress) option causes rsync to compress the transferred files. They’re not stored as compressed files on the destination computer though, they’re only compressed during the transfer itself. This can speed up lengthy transfers.

10. Monitoring Progress

Speaking of lengthy transfers, we can add some statistics so that we can see the progress of the transfer.

The -P (partial, progress) option actually adds two options, –partial and –progress . The –partial option tells rsync to keep partially transferred files if a transfer fails. This saves time when the transfer is restarted.

The –progress option prints, for each file, the data transferred in bytes and as a percentage, the speed of the transfer, the time taken, the number of the file being transferred, and the count of the remaining files.

The output scrolls past pretty quickly, and it is difficult to read. You can improve things slightly by removing the -v (verbose) option from the command. Even then it is still difficult to read as it whizzes by.

It is often more useful to monitor the progress of the overall transfer. You can do this with the –info option, and passing it “progress2” as a parameter.

This gives a progress report that is actually useful.

Like cp on Steroids

The rsync command is fast, flexible, and well worth the time it takes to familiarize yourself with it. The basic form of an rsync command with the -av options, source directory, and destination directory isn’t hard to remember at all.

For many use-cases, that’s all you need. Get comfortable with that and the rest will come easily.

RELATED: The Non-Beginner’s Guide to Syncing Data with Rsync